Mechatronics Measurement Trainer

Approx. Rs 35,000 / PieceGet Latest Price

Product BrochureProduct Details:

Dead weight testers are the basic primary standards used world wide for the accuratecalibration of Pressure Gauges. Dead Weight Testers are ideal for testing andcalibrating Pressure gauges, Transducers, Recorders, Digital Pressure Calibrators etc. Thesystem used in the Dead Weight Tester is vertically mounted precision lapped piston andcylinder assembly. Accurately calibrated mass are loaded on to the piston, which rises freelywith in its cylinder. Single cylinder pump is used to build the pressure at very high rate. Thewhole system is mounted on the base plate provided with four leg screws for level adjustment.The system is covered by stainless steel enclosure to give elegant look to the system. Pressureports are brought out to connect the test gauge. UniqueAcrylic see-through oil tank is designedto use it as oil reservoir. Over loading protection for test gauge is provided by leaking the oilinternally, so that the over flow oil goes back to the oil reservoir.

Approx. Rs 12,900 / PieceGet Latest Price

Product Details:

Temperature Measurement Equipment, Our company is supplying an extensive range of Temperature Measurement Trainer that is designed in such a way that it helps understanding in working of temperature transducers like thermocouple, RTD, thermistor and their working principle. Further, our range has a 31/2 digit digital LED display of 200mVFSD.

 

Setup:

• The System comprises of a small water Kettle as a temperature source up to 1000C with Thermocouple, RTD and Thermistor to sense the temperature
• Digital Indicator of 31/2 digit is supplied along with the sensor to indicate the temperature in degree centigrade
• The front panel of the instrument is designed in such a way that the schematic circuit diagram of the temperature indicator is shown
• All test points are brought outside to enable the student to understand the working of the instrument properly
• The system is self-explanatory and all necessary accessories will be supplied along with the kit

Approx. Rs 16,500 / PieceGet Latest Price

Product Details:

Piezo-Electric Measurement Trainer Module,
PiezoElectric Trainer comprises of piezoelectric crystal mounted inside housing and fitted on a base plate. Digital indicator is supplied to indicate the vibrational force.

Approx. Rs 13,000 / PieceGet Latest Price

Product Details:

Displacement Measurement Trainer Module Displacement Measurement module comprises of LVDT with micrometer jig fitted on the base plate to give displacement to the core of LVDT. Digital 3½ digit indicator is supplied to read the displacement in mm.

Approx. Rs 9,900.00 / PieceGet Latest Price

Product Details:

Strain Measurement Trainer Module, train Measurement Module comprises of Cantilever Beam bonded with four strain gauges,pan and weights upto 1Kg. Digital 3½ digit indicator module is supplied to read the microstrain.

 

 

Approx. Rs 16,500 / PieceGet Latest Price

Product Details:

Capacitance Measurement Trainer Module, Capacitance Trainer comprises of parallel plate/angular capacitor with dielectric medium air as sensor, mounted on the base plate with scale for displacement. Digital indicator is provided to read the change in capacitance in terms of displacement.

Approx. Rs 13,800 / PieceGet Latest Price

Product Details:

Temperature Measurement Trainer to measure temperature upto 100°C small heating source, and digital indicator is provided to read the temperature.

Approx. Rs 15,000 / PieceGet Latest Price

Product Details:

Inductance Measurement Trainer Module
Inductance Trainer comprises of a coil wound on a bobbin in which a magnetic material core moves as sensor. The displacement of the core is measured and displayed through a digital indicator.

Approx. Rs 15,000 / PieceGet Latest Price

Product Details:

Pressure Measurement Equipment, We are engaged in providing Pressure Measurement Trainer which is equipped with display unit comprising of inbuilt power supply, strain gauge signal conditioner, amplifier and analog to digital converter. The power supply provides power for signal conditioning and amplifiers, ADC and also for strain gauge excitation.

 

The setup:

• The setup comprises of air pump (Foot pump) to build pressure
• A bourdon tube dial gauge will be fixed to the pressure chamber parallel to the pressure transducer
• Pressure transducer is of diaphragm type on which strain gauges will be bonded

 

Display unit:

• The display unit comprises of inbuilt power supply, Strain gauge signal conditioner, amplifier and Analog to Digital converter
• The power supply provides power for signal conditioning and amplifiers, ADC and also for strain gauge excitation
• The system provides front panel bridge balancing through potentiometer adjustment
• The instrument is calibrated to read the pressure directly in Kg/cm2
• The whole system is self-contained with all accessories included
• The instrument is enclosed in a tapered fiberglass box and all necessary test points are brought out with schematic circuitry for understanding the working of the instrument
• The system operates on 230V AC Supply

Approx. Rs 15,000 / PieceGet Latest Price

Product Details:

Load Measurement Trainer comprises of strain gauge based load cell,loading arrangement to load in compression, weights and digital load indicator to read the load in Kg.

Approx. Rs 27,500.00 / PieceGet Latest Price

Product Details:

The setup is a table top module, it comprises of source and measuring tank. The measuring tank is made of acrylic material with gradation marked in liters. A small FHP pump is fitted to circulate the water. A rotameter with control valve is used to measure the flow rate. Digital timer is provided to note down the duration of flow and the volume of water is measured by the markings on the measuring tank to calculate the actual flow rate

Approx. Rs 15,000 / PieceGet Latest Price

Product Details:

Torque Measurement Trainer comprises of strain gauge based reaction type torque transducer, fulcrum arm of 1 M length with L angle to mount the sensor, Pan & weights with digital torque indicator to read the torque in Kg-m.

Approx. Rs 15,000 / PieceGet Latest Price

Product Details:

Pressure Measurement Trainer Module comprises of strain gauge based pressure cell, foot pump to build the pressure, pressure tank fitted with release valves and a bourdon pressure gauge. Digital pressure indictor to read the pressure in Kg / Cm² is provided.

Approx. Rs 35,750.00 / PieceGet Latest Price

Product Details:

Level trainer is a table top module, it comprises of measuring tank of 50 CM length, sump tank and load cell capacitance as level sensor. A vertical pump is fitted circulate the water. Digital display indicator is provided display water level in cm

Approx. Rs 24,000 / PieceGet Latest Price

Product Details:

Bourdon Gauge Trainer comprises of bourdon pressure gauge fitted on a pressure chamber, a displacement sensor is attached to the edge of the bourdon tube to sense the deflection of the bourdon tube due to pressure. The displacement indicator is provided to measure the deflection of the tube in terms of pressure and also in mm.

Approx. Rs 33,000 / PieceGet Latest Price

Product Details:

Current to Pressure Trainer. This setup comprises of a I to P converter fitted on a base. Two pressure gauges are fitted one at the input side and the other at the output of the I to P converter. A current source with digital display is provided to excite the I to P converter. A constant air supply should be provided to the system at 20 PsI Pressure from a standard compressor.

Approx. Rs 1,35,000 / PieceGet Latest Price

Product BrochureProduct Details:

Our Temperature Control Loop Setup is basically a PC based PID controller setup used for closed loop and open loop analysis of temperature process system. The setup comprises of RTD temperature Sensor. The water flows through the Rotameter and Process tank to which a heating coil is fitted. The heater is controlled by a Thirstier drive. The Thirstier drive is connected to PID controller. The manual control valve can control the water flow. The system is mounted on a tabletop model with all necessary Piping. Water at approx. 100 LPH has to be supplied to a system externally. The electronic panel comprises of ADC/DAC card with RS‐232 interfaces.

Software is provided for experimentation, Control action like PD, PI, PID can be conducted. Online data acquisition, trend plot are the salient feature of the system. Off line analysis, Printing of data graph can be done easily. The software is compatible with windows XP operating system. Detail Manual will be provided to conduct experiment.

SPECIFICATION:

·         Temperature Transmitter: RTD(PT‐100)

·         Capacity: 0‐100 degree C Output‐4‐20mA

·         Water Heater: 3kw at 1 to 2 LPM Maximum 100 degree centigrade.

·         Water Circulation: FHP pump with necessary piping (Flexible type).

·         Source Tank: SS Tank of capacity 20 liters (approximately)

·         Thirstier Card: Thirstier power controller capacity 3 KW,

·         Input‐4‐20mA, Output 0 to 230 V Ac.

·         Water Controller: Manual control valve to control water flow rate.

·         Power: 230V 50 Hz.

·         Mounting: Mounted on a Powder coated metal frame

·         (approximately 650X500X750 LXBXH)

·         Controller: PC based dedicated PID software to control the process, control action P, PI, PID. Trend plot with online and off line. Printing and analysis.

 

Approx. Rs 11,000.00 / Piece(s)Get Latest Price

Product Details:

Peizo Electric Trainer, Peizo Electric Trainer comprises of Piezoelectric crystal mounted inside housing and fitted on a base plate. Digital indicator is supplied to indicate the vibrational force.

Approx. Rs 55,000 / PieceGet Latest Price

Product Details:

Vibration Measurement Trainer Module
Vibration Measurement Trainer comprises of vibration generator of capacity 5 Newton with vibration exciter. Piezoelectric accelerometer is used to sense the vibration. Digital display unit will display displacement, velocity & acceleration sensed by the sensor.

Approx. Rs 11,000 / PieceGet Latest Price

Product Details:

L.D.R. Trainer comprises of light dependent resistor (LDR) fitted to the shaft, which moves inside the tube where lamp is fitted at the other end. Variable DC voltage source is provided to vary the light intensity. Digital indicator is supplied to measure the light intensity in terms of distance moved between LDR and light source.