Soil Testing

Approx. Rs 70,000 / PieceGet Latest Price

Product Details:

As per IS 2720 (Part XIII). The apparatus consists of Loading Unit with V-strips on which shear box housing rests, loading yoke with direct and lever system for applying normal load to the capacity of 8 kg/cm2, fixtures for proving ring, brackets for holding consolidation and strain dial gauges, and manually operated lead screw for application of shear stress. Complicated counter balancing arrangement has been dispensed with and the unit is provided with precalibrated load yoke, Shear box assembly for square specimen Two halves of shear box, Plain gripper plates - 2 nos., Perforated gripper plates - 2 nos., Porous stones - 2 nos., Top loading pad -1 no., Base Plate - 1 no., Shear box housing, accommodates the shear box assembly. Complete with two ball roller strips - 1 no., Specimen cutter, for specimen from larger sample - 1 no.Set of weights to give normal of through lever - 1 set, 0.05 kg/cm2 - 4 nos., 0.1 kg/cm2 - 1 no., 0.2 kg/cm2 - 1 no., 0.5 kg/cm2 - 4 nos., 1.0 kg/cm2 - 1 no. Supplied with Proving Ring 2 kN capacity & two

Models Available - Hand Operated, Motorised with single speed, motorised with 12 speeds.

Approx. Rs 27,000 / PieceGet Latest Price

Product Details:

We are indulged in manufacturing of a wide range of Sampling Augers, which can be availed by our valued clients at highly cost effective prices. Further, this equipment are extensively used to take clean samples from a certain depth of various types of soils such as hard, rocky, medium and high cohesion in such a way so that it is not mixed with other layers of soil.

Approx. Rs 10,800 / PieceGet Latest Price

Product Details:

Screw Jack Type, consists of adaptor plates and for meter specimens. Above apparatus can be provided with stand to obtain samples from one sample, at extra cost.

Approx. Rs 4,000 / PieceGet Latest Price

Product Details:

As per IS: 2720 Part XV. Single cell model. It comprises of a loading frame having with a loading yoke and lever arm complete with counter balancing adjustments. A fixed ring consolidation cell for a complete with two porous stones, pressure pad, cutting ring and acrylic tube water reservoir with tubing and connectors is provided. A set of weights is provided to give a Specimen. Supplied complete

Approx. Rs 4,000 / PieceGet Latest Price

Product Details:

The apparatus is used to determine dry density of coarse, fine and medium grained soils. It consists of a cylinder fitted with conical funnel and shutter and calibrating container, with in the center.

Approx. Rs 4,000 / PieceGet Latest Price

Product Details:

Product Details:

Made of steel long with . , fitted with a lip to enable it to be located on top of the core cutter. Supplied complete with rammer.

Approx. Rs 22,500 / PieceGet Latest Price

Product Details:

Micro Technologies” are a leading Manufacturer, Trader and Exporter of a wide range of Pharmacy, Medical, Glassware Engineering Model, Laboratory Equipment, Physics Equipment etc. With this we also export our products to worldwide.

Approx. Rs 2,500 / PieceGet Latest Price

Product Details:

As per IS: 2720 ( part VII ). Consists one each of Porcelain evaporating dish, Shrinkage dish, Glass cup, Perspex prong plate with three metal prongs, Perspex plain plate, Spatula, Plastic Without mercury. 
Above apparatus can be supplied in wooden carrying case at extra cost.

Approx. Rs 2,000 / PieceGet Latest Price

Product Details:

Consists of one each of glass pate, measuring, flexible spatula, evaporating dish, dia and 6 nos moisture cans packed in a cardboard box. 
Above apparatus can be supplied in wooden carrying case at extra cost.

Approx. Rs 2,000 / PieceGet Latest Price

Product Details:

As per IS 2720 (Part V). Liquid Limit is that water content at which a part of soil cut by a groove of standard dimension will flow together for a under air impact of in a standard apparatus. It consists of a brass cup held on adjustable brackets. It is supplied with grooving tools along with a to adjust the height of blow. A counter is also fitted to register the number of blows.

Models available - Hand Operated & Motorized

Approx. Rs 60,000 / SetGet Latest Price

Product Details:

The California bearing ratio test is penetration test meant for the evaluation of subgrade strength of roads and pavements. The results obtained by these tests are used with the empirical curves to determine the thickness of pavement and its component layers. This is the most widely used method for the design of flexible pavement.

Approx. Rs 15,000 / PieceGet Latest Price

Product Details:

This portable hand operated equipment is designed to obtain a direct and rapid in-situ evaluation of the structural strength of road pavement layers constructed with unbound materials. The DPC Penetrometer results can be compared and interpreted with CBR (California Bearing Ratio) as per sperimental Kleyn 1982 studies.

The equipment consists of:

• Drop sliding hammer 8 kg weight, falling height of 575 mm
• Penetration rod with cone 60 Degree with 20 mm dia. 
• Wooden carrying case

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)

Approx. Rs 35,000 / PieceGet Latest Price

Product Details:

As per IS:2720 (Part VII & VIII). The machine is designed to compact specimens automatically and uniformly for Proctor and C.B.R. tests, eliminating the laborious hand compaction method. The rotation of the mould after each stroke and the lateral movement of the table (for C.B.R. mould only) ensures complete coverage of soil surface. The height of the compaction rammer can be quickly switched from 310 to 450mm or vice versa by hand lever. A hammer in two parts adjustable for 2.6 kg for light compaction and 4.89 kg for heavy compaction is supplied as a standard component of the unit. A graduated dial incorporating a micro switch, enables the number of blows to be pre-set before each test and automatically stops the machine on completion.

Approx. Rs 16,500 / PieceGet Latest Price

Product Details:

Consists of a body housing a spring, a plunger calibrated to read 0-40 kg x 1 kg and a handle. It has a long stem & a short stem, both graduated at 12.5mm intervals to indicate the depth of penetration and for use with needles of larger & smaller areas respectively. Complete with needle point set comprising one each of 0.25, 0.5, 1, 1.5, 2, 3.5 & 6 sq. cm & tommy pin. Supplied in a wooden carrying case.

Approx. Rs 4,500 / PieceGet Latest Price

Product Details:

As per IS: 2720 (Part II) - 1973. The apparatus is supplied in polished wooden carrying case. The apparatus consists of a pressure vessel with clamp for sealing, rubber sealing gasket, pressure gauge in on wet weight basis, a counter poised balance to weigh the sample, a scoop for measuring reagent, one cleaning brush, set of 4 steel balls and one bottle of reagent (500gm).

Approx. Rs 1.13 Lakh / PieceGet Latest Price

Product Details:

As per IS 2720 (Part XIV). The apparatus consists with a fixed amplitude. Cylindrical unit weight mould of 3000ml capacity, complete with guide sleeves and clamp, surcharge weight with base plate and handle. Cylindrical unit weight mould complete with guide sleeves and clamp, surcharge weight as above. Dial Gauge Holder. Without Dial Gauges.

Approx. Rs 82,000 / PieceGet Latest Price

Product Details:

It consists of a load frame . The lower platen is moved up for applying load. The top cross head is adjustable and carries hexagonal adaptor for taking standard proving rings. A strain dial gauge bracket is provided and fitted to one of the pillars. The instruments is supplied with upper and lower platens, an adaptor for the proving ring and a cone seating. Supplied complete with Proving Ring 2 kN capacity

Models available:

• Hand Operated Load Frame
• Motorized load frame with 3 rates of strain

Approx. Rs 1.1 Lakh / PieceGet Latest Price

Product Details:

Consists of:

• Load frame, Motorized, to give 6 rates of strain Proving Ring 'BENT', 2.5 kN.
• Triaxial Cell 'BENT', for 38 mm dia. x 76 mm high specimen for lateral
• Pore Pressure Apparatus 'BENT', for measurement of low negative and positive pore pressures, high pore pressures upto 10 kg/cm²
• Volume Change Gauge 'BENT', for measurement of large volume changes with a of fluid per cycle.
• Lateral Pressure Assembly 'BENT', 10 kg./cm², with pressure gauge and foot pump
• Self Compensating Constant Pressure System ( Oil / Water type ) 'BENT', pressure range 10 kg/cm, rotated through reduction gear.

Approx. Rs 75,000 / PieceGet Latest Price

Product Details:

The apparatus consists of :

• Hydraulic Jack - remote controlled, 500 kN, supplied complete with 150mm dia.
• pressure gauge and 5 nos.
• one meter long metal pipes with end fittings., Ball and socket assembly
• Set of Bracket for high with flanges
• bolts and nuts - 2 nos
• bolts and nuts - 1 no., Datum Bar
• 5 meter span, long in 16 pieces
• Base and top plate - 4 nos.

Approx. Rs 24,000 / PieceGet Latest Price

Product Details:

To measure the resistance of bituminous mixtures to stripping of asphalt from the rock particles and is generally used to evaluate the mineral aggregate. It consists of a rotating disc at a speed of approximately 100 R. P. M. Disc carries four bottles. Supplied complete with time switch. 

Approx. Rs 4,500 / PieceGet Latest Price

Product Details:

The apparatus consists of - tripod stand with 5 metre long legs ( in two pieces ) complete with a tee bolt and pulley block or sheave. Drop hammer as per is : 2131 with lifting eye. Guide pipe assembly with two end caps to give a free fall of 75cm for the drop hammer. split spoon sampler with brass liner comprises of split barrel 50. 8mm , driving shoe for sampler made of hardened steel, head assembly having square thread suitable for 'a' type drill rod complete with ball type check valve. Type 'a' drill rod 1 meter long. Supplied without manila rope.

Approx. Rs 60,000 / PieceGet Latest Price

Product Details:

Fitted with digital temp controller, timer for 2 hours and buzzer.  Complete with Glass reactions vessels and Air condensers. Supplied complete with stand to accommodate vessels. 

Available in models:

• Suitable for 15 samples
• Suitable for 6 samples

Approx. Rs 2,500 / PieceGet Latest Price

Product Details:

We are indulged in manufacturing of a wide range of Sampling Augers, which can be availed by our valued clients at highly cost effective prices. Further, this equipment are extensively used to take clean samples from a certain depth of various types of soils such as hard, rocky, medium and high cohesion in such a way so that it is not mixed with other layers of soil.

Approx. Rs 52,500 / PieceGet Latest Price

Product Details:

As per IS 2720 ( Part XVI ), motorized. It consists of Bench Type capacity, complete with Mild high, 2.6 & 4.89 kg mild steel rammer, 2.5 kg annular & slotted weight, Aluminium tripod, Penetration piston, Brass perforated plate with stem and lock nut, cutting collar and Circular spacer disc with detachable handle. Supplied. Above unit can also be supplied with heavy duty, Housing Type (covered body) load frame at extra cost.

Approx. Rs 35,000 / PieceGet Latest Price

Product Details:

As per IS 1199 ( for Cement Concrete ). The instrument is recommended for concrete where nominal size of coarse aggregates does not exceed 38mm. It comprises of fitted on a heavy duty Cast Iron frame. A cam action provides a free fall of 12.5 mm to the table. A with base dia. of 250 mm and top dia. of 170 mm is also provided along

Available in models

• Hand operated with M.S. table top
• Motorised with M.S. table top
• Hand operated with Gun Metal table top
• Motorised with Gun Metal table top

Approx. Rs 15,000 / PieceGet Latest Price

Product Details:

(As per model desired) The shaker is driven by motor through a reduction gear. Unit is fitted